Product News! Discover the new material Fusia Digital Wax.
Casting as easy as wax. The power of SLA 3D printing meets effortless casting.
Casting as easy as wax. The power of SLA 3D printing meets effortless casting.
VITRA DL375 is a photosensitive material for DWS stereolithographic 3D printers, developed for high-definition prototypes and concept designs. It is suitable for both thin and thick prototypes. It is the ideal material for smooth and precise transparent samples. The special formula counteracts yellowing.
To increase the degree of transparency, it is necessary to mechanically polish the surface either with a brush or abrasive cream.
Post-curing treatment: After the part has been printed, a treatment in a UV oven of no more than 5 minutes is recommended.
| Environmental Values for Use | 22°C - 27°C - max, RH 40% - 60% |
| Appearance / Colour | Liquid / Transparent |
| Density | 1,01 g/cm³ |
| Viscosity | 1000 ~ 1400 mPa•s at 25°C |
| Elongation (%) | |
| Elongation at Break (%) | 6 ~ 10 |
| Elastic module (MPa) | |
| Shore Hardness (Shore A) | |
| Shore Hardness (Shore D) | |
| Flexural Strength (MPa) | 80 ~ 105 |
| Flexural Modulus (MPa) | 2000 ~ 2500 |
| Tensile Strength (MPa) | 45 ~ 55 |
| Tensile Modulus (MPa) | 1700 ~ 2200 |
| HDT@0,46MPa | 48 ~ 52 |
| HDT@1,81MPa | |
| Notched IZOD (J/m) | |
| H2O absorption in 24h (%) | |
| Application / Use | Transparent Prototypes, Clear Functional Parts |
