Product News! Discover the new material Fusia Digital Wax.
Casting as easy as wax. The power of SLA 3D printing meets effortless casting.
Casting as easy as wax. The power of SLA 3D printing meets effortless casting.
THERMA DM500 is a photosensitive material developed for the manufacture of molds for injection of plastic materials.
The injected polymer can reach a maximum temperature of 200 °C with a closing pressure of up to 90 bar.
| Environmental Values for Use | 22°C - 27°C - max, RH 40% - 60% |
| Appearance / Colour | Liquid / Light Grey |
| Density | 1,15 g/cm³ |
| Viscosity | 2000 ~ 3000 mPa•s at 25°C |
| Elongation (%) | |
| Elongation at Break (%) | 5 ~ 10 |
| Elastic module (MPa) | |
| Shore Hardness (Shore A) | |
| Shore Hardness (Shore D) | 90 ~ 91 |
| Flexural Strength (MPa) | 70 ~ 160 |
| Flexural Modulus (MPa) | 1700 ~ 4000 |
| Tensile Strength (MPa) | 50 ~ 80 |
| Tensile Modulus (MPa) | 2400 ~ 3050 |
| HDT@0,46MPa | 55 ~ 90 |
| HDT@1,81MPa | |
| Notched IZOD (J/m) | |
| H2O absorption in 24h (%) | |
| Application / Use | Injection Moulding |
